WAPDA Multiple Electricity Meters Policy

This is a question most Pakistani homeowners ask themselves, whether it is possible to have two electricity meters in one house or not. In a policy of WAPDA multiple electricity meters, the response is dependent on some conditions. NEPRA regulates the policy and executes it with the help of the local DISCOs such as LESCO, IESCO, PESCO, and others. This is a full, plain, and simple guideline on Multiple Electricity Meters Policy in Pakistan, who is eligible, what is authorized and how the process is going to be done.

Understanding WAPDA Multiple Electricity Meters Policy

In Pakistan, Multiple Electricity Meters Policy is under direct management of regional DISCOs, and is not under WAPDA. Discos, LESCO, IESCO, or PESCO, all of them are governed by the rules of NEPRA. The WAPDA multiple electricity meters policy provides that a house can have a more than one meter only when the house is partitioned into separate, independent units.

As an example, when your house is two-story and has two entrances, two kitchens, and two washrooms, two electricity meters can be assigned to one house. The point is to make sure that each meter can serve one consumer and will not be used to abuse low tariff slabs.

Why the Restriction on Multiple Meters Exists

The primary goal of the policy is to avoid abuse of the system of electricity tariff slab framework. It reduces the total electricity bill of the consumers when they separate their load into two electricity meters on a house, which is against tariff policy. This is the reason the electricity meters are not allowed in case of any ambiguous dwelling units.

Therefore, prior to application, ensure that your property is physically separated and the portions are really independent.

How to Apply for Two Electricity Meters for One House

As long as you meet the requirements, the following is the way you can apply through the Multiple Electricity Meters Policy:

• Check your local DISCO policy —  Visit your nearest customer service centre (LESCO, IESCO etc.) to know what is required at the moment.
• Ensure separate wiring and access — Each section should be wired and entered independently.
• Gather documents — CNIC, evidence of ownership or tenancy and a wiring test report done by a licensed electrician.
• Submit the form — Apply at the sub-division office; you will receive an application ID.
• Inspection and approval — DISCO will check the separation and a Demand Notice will be issued.
• Payment and installation — Pay and your new meter of electricity will be installed.

Remember, WAPDA no longer installs new connections, the process is managed by local DISCOs under NEPRA.

WAPDA Multiple Electricity Meters Policy

There’s no blanket ban on two electricity meters for one house in Pakistan. But you must meet the physical separation requirement. Always check with your local DISCO for the latest Multiple Electricity Meters Policy updates, as rules can vary slightly by region.

FAQ’s

Can I get two electricity meters for one house if I rent out a portion?

Yes, most times you can, except that local power company (DISCO) insists that the rental part should be a separate and distinct dwelling unit with own entrance and facilities. This will assure that the two links are in fact used by two distinct sets of consumers and also will make sure that the low-tariff slabs are not abused.

What paperwork is essential for the wapda multiple electricity meters policy application?

It will require an application form that is filled out, CNICs of both owners/ tenants, evidence of ownership of the property (e.g. a title deed), a certified electrician wiring certificate indicating that the wiring of the second meter is entirely independent of the first one.

Does having multiple electricity meters policy automatically lower my overall bill?

Yes, absolutely. The biggest saving comes because each meter's consumption is calculated on its own, allowing both to benefit from the lower, initial tariff slabs. This division avoids pushing your total house consumption into the highest-priced slab, significantly cutting your overall costs.

How long does it take to get approval for a second electricity meters?

The process timeline can vary greatly by utility company and location, but typically, once all documents are accurately submitted and the payment is made, installation may take anywhere from a few weeks to a couple of months. Follow up consistently after submitting your initial application to avoid unnecessary delays.